logo
搜索
菜单

工程学 视频 在线看

当前20/33页
排序: 本周浏览数
In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure 10.3791/56884-v 10:01 min
In Situ High Pressure Hydrogen Tribological Testing of Common Polymer Materials Used in the Hydrogen Delivery Infrastructure
Installation Method to Enhance Quality Control for Fiber Reinforced Polymer Spike Anchors 10.3791/56886-v 06:21 min
Installation Method to Enhance Quality Control for Fiber Reinforced Polymer Spike Anchors
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing 10.3791/56925-v 08:29 min
A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing
Processing of Bulk Nanocrystalline Metals at the US Army Research Laboratory 10.3791/56950-v 08:58 min
Processing of Bulk Nanocrystalline Metals at the US Army Research Laboratory
Production of Single Tracks of Ti-6Al-4V by Directed Energy Deposition to Determine the Layer Thickness for Multilayer Deposition 10.3791/56966-v 09:12 min
Production of Single Tracks of Ti-6Al-4V by Directed Energy Deposition to Determine the Layer Thickness for Multilayer Deposition
Ultrasonic Fatigue Testing in the Tension-Compression Mode 10.3791/57007-v 06:54 min
Ultrasonic Fatigue Testing in the Tension-Compression Mode
Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes 10.3791/57023-v 11:21 min
Atmospheric Pressure Fabrication of Large-Sized Single-Layer Rectangular SnSe Flakes
Experimental Methods for Spin- and Angle-Resolved Photoemission Spectroscopy Combined with Polarization-Variable Laser 10.3791/57090-v 09:00 min
Experimental Methods for Spin- and Angle-Resolved Photoemission Spectroscopy Combined with Polarization-Variable Laser
Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model 10.3791/57103-v
Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model
Guidelines and Experience Using Imaging Biomarker Explorer (IBEX) for Radiomics 10.3791/57132-v 10:17 min
Guidelines and Experience Using Imaging Biomarker Explorer (IBEX) for Radiomics
Novel Photoacoustic Microscopy and Optical Coherence Tomography Dual-modality Chorioretinal Imaging in Living Rabbit Eyes 10.3791/57135-v 09:20 min
Novel Photoacoustic Microscopy and Optical Coherence Tomography Dual-modality Chorioretinal Imaging in Living Rabbit Eyes
Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture 10.3791/57163-v
Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature 10.3791/57180-v 14:51 min
An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature
Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver 10.3791/57207-v
Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy 10.3791/57221-v 10:40 min
A Fabrication and Measurement Method for a Flexible Ferroelectric Element Based on Van Der Waals Heteroepitaxy
Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System 10.3791/57232-v 10:52 min
Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions 10.3791/57238-v 11:51 min
Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions
Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods 10.3791/57244-v 09:17 min
Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods
Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes 10.3791/57254-v
Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes
Enhanced Electron Injection and Exciton Confinement for Pure Blue Quantum-Dot Light-Emitting Diodes by Introducing Partially Oxidized Aluminum Cathode 10.3791/57260-v 10:41 min
Enhanced Electron Injection and Exciton Confinement for Pure Blue Quantum-Dot Light-Emitting Diodes by Introducing Partially Oxidized Aluminum Cathode
返回顶部